The
Inverter SIEIDrive – ADV50 concentrates all the characteristics
required by modern industrial processes in a single product while at
the same time complying with the typical needs of installers and system
integrators who require forefront, practical solutions that are, above
all, advantageous in terms of space and cost.
The
ADV50, with its high level functions and integrated PLC, is the ideal
solution to cater to the wide range of different application
requirements of the automation sector, providing a simple but powerful
method of operation and programming of the most modern control systems.
Applications: Roller
door, Small elevator, Escalator, Parking device, X-Y axis of travelling
crane; Dumpling maker, Food stirrer, Grinder, Small lathe, Milling
machines, Injection molding (clamp); 4 side planer, Woodcarver, Wood
working machine; Wastewater processing system, Costant pressure water
treatment system, Air compressor; Heat exchange fans, Building water
dispenser system; Round weaver, Cross weaver, Ribbon weaver, Printing
press, Knitting machines; Pulverizer, Treadmil, Feeder, Industrial
washing machine, Packing machine, Centrifuge.
Downloads
- ADV50,
Quick Start (sw V1.11)
- ADV50, Quick Start (sw V1.10)
- ADV50,
User Manual (sw V1.11)
- ADV50, User Manual (sw V1.10)
Features
- Regulation control modes: V/f or
sensorless control with SPWM modulation (Sinusoidal Pulse Width
Modulation)
- Output frequency: 0.1 ~ 600Hz
- EMC Filter integrated (for models 230V
1-phase and 460V 3-phase)
- RFI-switch for IT mains
- Torque Characteristics: starting torque
can be 150% at 3.0Hz
- Overload Endurance: 150% of rated current
for 1 minute
- Accel/Decel Time: 0.1 to 600 seconds (2
Independent settings for Accel/Decel time)
- DC Braking: Operation frequency
0.1-600.0Hz, output 0-100% rated current Start time 0-60 seconds, stop
time 0-60 seconds 2 Analogue Inputs (0-10V and 0-10/4-20mA)
- 1 Multifunction Analogue Outputs (0-10V)
- 6 Digital Inputs (PNP / NPN)
- 1 Digital Outputs
- 1 Relay Outputs, form C/change-over
contact
- Standard keypad 3 LEDs status
- Optional keypad (6-key, 7-segment LED
with 4-digit, 5 status LEDs, master frequency, output frequency, output
current, custom units, parameter values for setup and lock, faults,
RUN, STOP, RESET, FWD/REV)
- RS-485 communication interface (RJ-45)
with Modbus protocol
- Interfacing with the more common field
bus: ProfiBus, CANopen, DeviceNet, and LonWorks (optional modules)
- Easy DC BUS sharing
- Flexible extension (available optional
I/O and Relay Expansion cards)
- IP20 protection degree
Functions
- 3 points adjustable V/f curve
- Automatic Voltage Regulation (AVR)
- Accel/decel S-Curve
- Over-voltage/over-current stall
prevention
- 5 fault records
- Reverse inhibition
- Momentary power loss restart
- DC braking
- Auto torque/slip compensation
- Auto tuning adjustable carrier frequency
- Output frequency limits
- Parameter lock/reset
- Built-in PID feedback control
- Built-in PLC function
- External counter
- MODBUS communication
- Abnormal reset
- Abnormal re-start
- Power-saving
- Fan control
- Sleep/wake frequency
- 1st/2nd frequency source selections
- 1st/2nd frequency source combination
- NPN/PNP selection
- Complete protection function
Options
- Keypad
- Digital I/O Expansion cards
- DeviceNet module
- Profibus module
- CANopen module
- DIN-rail adapters
- Earthing plate
- USB-RS485 RJ45 Converter
- Braking Unit Module
- Standard keypad extension cable 2 mt
- Options on request only: Relays Expansion
cards, Encoder Expansion card, USB 1.1 Expansion card, LonWorks module,
Zero Phase Reactor, Digital Keypad for parameters copy
|
